Llistar TÃtols
S'han trobat 148 Ãtems
Llistant Ãtems des de 75 a 100:
| Format | Data | TÃtol | Autor |
|---|
| Format | Data | TÃtol | Autor |
|---|
|
juny 2015 |
Improvement of the carbon composite skin of the fuselage of an aircraft by means of optimization algorithms to define laminate stacking sequences |
GarcÃa GarcÃa, Axel
|
|
|
Improvement of the carbon composite skin of the fuselage of an aircraft by means of optimization algorithms to define laminate stacking sequences |
GarcÃa GarcÃa, Axel
|
|
|
18 juliol 2019 |
Improving compression after impact response of composite laminates through ply level hybridization with thin plies and unsymmetrical designs |
Sasikumar, Aravind
|
|
31 maig 2023 |
Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies |
ParÃs Carballo, Federico
|
|
|
31 maig 2023 |
Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies |
ParÃs, Federico
|
|
|
31 maig 2023 |
Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole |
Mollenhauer, David
|
|
|
31 maig 2023 |
Influence of voids on thick DCB joint behavior |
Fan, Jialiang
|
|
|
|
An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials |
Turon Travesa, Albert
; Camanho, Pedro Manuel Ponces Rodrigues de Castro
; Costa i Balanzat, Josep
; Dávila, Carlos G.
|
|
|
octubre 2004 |
An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials |
Turon Travesa, Albert
; Camanho, Pedro Manuel Ponces Rodrigues de Castro
; Costa i Balanzat, Josep
; Dávila, Carlos G.
|
|
|
1 juny 2018 |
An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials |
|
|
|
5 juny 2018 |
An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials |
Turon Travesa, Albert
; Camanho, Pedro Manuel Ponces Rodrigues de Castro
; Costa i Balanzat, Josep
; Dávila, Carlos G.
|
|
|
juliol 2024 |
Interlaminar fracture testing of multidirectional laminates: on finitewidth effect and residual stresses |
Garulli, Torquato
; Arteiro, Albertino
; Blanco Villaverde, Norbert
; Renart Canalias, Jordi
|
|
|
31 maig 2023 |
Investigating shear performance of PMCS |
Flores, Mark
|
|
|
31 maig 2023 |
Investigation of failure mechanisms in L-angle composite laminates |
Bushpalli, Sindhu
|
|
|
31 maig 2023 |
Investigation of thickness effects in bi-axially braided glass fibre laminates using a parametrised RVE model |
Luplow, Tim
|
|
|
31 maig 2023 |
Investigation of transverse matrix cracking in fatigue for laminated composites |
Patti, Stacy
|
|
|
31 maig 2023 |
Investigation of transverse matrix cracking in fatigue for laminated composites |
Patti, Stacy
; Kaminski, M.
; Maire, J-F.
; Laurin, F.
; Maimà Vert, Pere
|
|
|
31 maig 2023 |
Longitudinal tensile failure models: experimental validation, benchmarking and future directions |
Swolfs, Yentl
|
|
|
31 maig 2023 |
Material testing 2.0 for composites |
Pierron, Fabrice
|
|
|
|
Maximization of the fundamental frequency of plates and cylinders |
Trias Mansilla, Daniel
; Maimà Vert, Pere
; Blanco Villaverde, Norbert
|
|
|
15 novembre 2016 |
Maximization of the fundamental frequency of plates and cylinders |
Trias Mansilla, Daniel
; Maimà Vert, Pere
; Blanco Villaverde, Norbert
|
|
|
31 maig 2023 |
Measurement of mixed-mode cohesive laws of a UD composite undergoing delamination with large-scale bridging |
Erives, Ruben
|
|
|
31 maig 2023 |
Measuring the compressive behaviour of glass/carbon fibre hybrid composite with a 4-point flexural test |
Tongloet, Aree
|
|
|
31 maig 2023 |
Mechanical joining technology between metal and carbon fiber reinforced polymers through punching |
Latorre Lázaro, Núria
|
|
|
31 maig 2023 |
Microcracking of CFRP composites during cryogenic thermal cycling |
Edwards, Huw
|
